Dell UPS 4200R - Manual (Page 73)

Advanced Management 74
Figure 56 provides a typical example with PDU Power Schedule configuration. The details of Power
Schedule 1 to Power Schedule 8 are available from the device Web interface. Checking all Power
Schedule “n” advanced parameters will synchronize all the advanced parameters details of the category.
Figure 56. Advanced Parameters Not Displayed
Multiple Cards Configurations Synchronization
The Dell MUMC can make changes to multiple Dell Network Management Card configurations
simultaneously.
Proceed as follows:
1 From Management> Nodes Settings, select several cards from the Node List page using a “crtl-and-
click” action (see Figure 57).
2 From the Node List button , select Set Login Parameters and enter the card login and password.
The access status changes from: Access Denied ( ) to Access OK ( ).
After a few seconds, the Node configuration panel is updated.
3 From the combo box select the configuration that will be the model, or click Edit .
The parameters that have different values on the cards have the sign.
4 Select the parameters you want to synchronize (with the check box).
5 Click Synchronize.
0119_2-Dell MUMC UG.book Page 74 Saturday, November 2, 2013 4:59 PM