Dell UPS 4200R - Manual (Page 60)

Supervision 61
• The section {x} voltage is in normal range
• The outlet group {x} current is in normal range
• The outlet group {x} is in normal load
• The outlet group {x} is on
• The phase {x} output load is in normal range
• The output frequency is in normal range
• The output load is in normal range
• The output voltage is in normal range
WARNING A problem occurred on the UPS device. Your application is still protected.
Warning Event List (UPSs, PDUs, Applications, Generic devices):
• The system is powered by the UPS battery
• Output on automatic bypass
• Output on manual bypass
• Humidity is below low threshold
• Humidity is above high threshold
• Temperature is below low threshold
• Temperature is above high threshold
• Warning Alarm (a generic Warning alarm is active on the device)
• The device is under its load alarm threshold
• The device is over its load alarm threshold
• Protection lost
• Redundancy lost
• Shutdown in <time>
• Remote Communication Error (remote communication or configuration issue is detected)
0119_2-Dell MUMC UG.book Page 61 Saturday, November 2, 2013 4:59 PM