Dell UPS 4200R - Manual (Page 74)

Advanced Management 75
Figure 57. NMC Mass Configuration
Nodes Upgrade
Upload Device Firmware
Perform this procedure to upload a device firmware:
NOTE:
Refer to the network cards release notes to determine the latest firmware release compatible with the hardware
revision.
1 From Management > Nodes Upgrade, select the cards on the Node List page.
2 From the Node List button
, select Set Login Parameters and enter the card login and password.
The access status changes from: Access Denied ( ) to Access OK ( ).
3 From the Firmware > Import Firmware File… list box, the uploading window displays.
4 Click Browse, select the firmware from a disk accessible from the computer, and click Open.
0119_2-Dell MUMC UG.book Page 75 Saturday, November 2, 2013 4:59 PM