Dell UPS 4200R - Manual (Page 41)

Supervision 42
Figure 20. Information Panel
Status Panel
The following node status is displayed in this panel (see Figure 21):
• Power source: AC Power / Battery
•
Battery state: Charging / Discharging / Default / Floating / Resting
• Load Level: Output load level of the device
• Battery capacity: Battery capacity of the device
• Battery run time: Thee device remaining backup time
• Master Output: Main output status (ON/OFF/Internal Failure/On Automatic Bypass/Manual
ByPass/Overload)
• Outlet #x: Output outlet status (ON/OFF)
NOTE: The information displayed in this panel depends on the UPS capabilities.
Figure 21. Status Panel
0119_2-Dell MUMC UG.book Page 42 Saturday, November 2, 2013 4:59 PM