Installing the internal dual sd module, Internal sd card, Removing an internal sd card – Dell PowerVault DX6104 User Manual

Page 63: Installing an internal sd card

Advertising
background image

Installing The Internal Dual SD Module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.

1.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and

peripherals.

2.

Open the system.

3.

Remove the expansion-card riser 1 and any card(s) installed in the riser.

4.

Locate the IDSDM connector on the system board.

5.

Align the connectors on the system board and the dual SD module.

6.

Push the dual SD module until it is firmly seated on the system board.

7.

Replace the expansion-card riser 1 and if applicable, replace the card(s) in the riser.

8.

Close the system.

9.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Internal SD Card

Removing An Internal SD Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.

1.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and

peripherals.

2.

Open the system.

3.

Locate the SD card slot on the internal dual SD module and press inward on the card to release it from the slot and

remove the card.

4.

Close the system.

5.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing An Internal SD Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.

NOTE: To use an SD card with your system, ensure that the internal SD card port is enabled in the System Setup.

63

Advertising