Installing the integrated storage controller card – Dell PowerVault DX6104 User Manual
Page 65
Figure 26. Removing and Installing the Integrated Storage Controller Card
1. touch-points (2)
2. storage controller card
3. storage-controller card holder
4. release levers (2)
5. storage-controller card connector
Installing The Integrated Storage Controller Card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.
Open the system.
3.
Align one end of the card with the card holder on the system board.
4.
Lower the other end of the card into the storage-controller card holder on the system board.
5.
Press the touch-points on the card and push the card down until it is fully seated.
65