Replacing the fan assembly, E "replacing the fan assembly – Dell POWEREDGE R610 User Manual
Page 107
Advertising
Installing System Components
107
Figure 3-15. Removing and Replacing the Fan Assembly
Replacing the Fan Assembly
1 Being careful not to pinch the cables connected to the backplane board,
replace the fan assembly in the chassis, and close the two latches to secure
the assembly.
2 Connect each fan’s power cable to the power connectors on the system
board.
1
FAN1
2
FAN2
3
FAN3
4
FAN4
5
FAN5
6
FAN6 (dual-processor configurations
only)
7
fan power cables (6)
8
fan power connectors (6)
9
fan assembly latches (2)
10 fan blank (must be installed in single
processor configuration for proper
cooling airflow)
2
3
4
5
6
7
1
8
9
10
Advertising