Dell POWEREDGE R610 User Manual

Page 60

Advertising
background image

60

Using the System Setup Program and UEFI Boot Manager

PCI IRQ

Assignment

Displays a screen to change the IRQ assigned to each of the

integrated devices on the PCI bus, and any installed

expansion card that requires an IRQ.

Serial

Communication

(Off default)

See "Serial Communication Screen."

Embedded Server

Management

See "Embedded Server Management Screen."

Power

Management

See "Power Management Screen."

System Security

Displays a screen to configure the system password and setup

password features. See "System Security Screen," Using the

System Password," and "Using the Setup Password" for more

information.

Keyboard

NumLock

(On default)

Determines whether your system starts up with the NumLock

mode activated on 101- or 102-key keyboards (does not apply

to 84-key keyboards).

Report Keyboard

Errors

(Report default)

Enables or disables reporting of keyboard errors during the

POST. Select Report for host systems that have keyboards

attached. Select Do Not Report to suppress all error messages

relating to the keyboard or keyboard controller during POST.

This setting does not affect the operation of the keyboard

itself if a keyboard is attached to the system.

F1/F2 Prompt on

Error (Enabled

default)

Enables the system to halt on errors during POST, which

allows the user to observe events that may scroll by unnoticed

during normal POST. You can select F1 to continue or F2 to

enter the System Setup program.

CAUTION:

When setting this option to Disabled, the

system will not halt if an error occurs during POST. Any
critical errors will be displayed and logged in the system
event log.

Option

Description

Advertising