Dell POWEREDGE R610 - Manual (Page 81)

Installing System Components 81
Figure 3-3. Removing and Replacing the System Cover
Closing the System
1 Lift up the latch on the cover.
2 Place the cover onto the chassis and offset it slightly towards the back of
the system, so that the two hooks on the back edge of the cover fit over the
corresponding tabs on the back edge of the chassis. See Figure 3-3.
3 Slide the cover towards the front of the chassis and close the latch.
4 Rotate the latch release lock in a clockwise direction to secure the cover.
1 latch 2 latch release lock
2
1