Removing an optical drive, 3 open the system. see "opening the system, 6 close the system. see "closing the system – Dell POWEREDGE R610 User Manual

Page 109

Advertising
background image

Installing System Components

109

NOTE:

DVD devices are data only.

Removing an Optical Drive

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

1 Remove the bezel. See "Removing and Replacing the Optional Front

Bezel."

2 Turn off the system, including any attached peripherals, and disconnect

the system from its electrical outlet.

3 Open the system. See "Opening the System."
4 Disconnect the cable connector labeled OPTICAL from the back of the

drive.

5 To remove the drive carrier, press the release latch, then slide the carrier

out of the chassis. See Figure 3-16.

6 Close the system. See "Closing the System."
7 Replace the front bezel, if applicable. See "Removing and Replacing the

Optional Front Bezel."

Advertising