Dell Intel PRO Family of Adapters - Manual (Page 19)

Starting NUMA Node. This setting specifies the NUMA node on which the first FCoE queue is allocated.
NUMA Node Count. This setting specifies the total number of NUMA nodes to be used to assign FCoE queues.
Starting RSS Core Offset. This setting specifies the core number on the starting NUMA node on which the first FCoE
queue is allocated.
Instructions for installing and using Intel® PROSet for Windows Device Manager are described in the Intel® Network Adapters
User Guide.
NOTE: PROSetCL.EXE is used for DCB/FCoE configuration on Microsoft* Windows Server* 2008 Core, Microsoft Windows
Server 2008 R2 Core, and Microsoft Windows Server 2012 operating systems.
NOTE: From the Boot Options Tab, the user will see the Flash Information Button. Clicking on the Flash
Information Button will open the Flash Information Dialog. From the Flash Information Dialog, clicking on the
Update Flash button in the Boot Options tab allows Intel® iSCSI Boot, Intel® Boot Agent (IBA), Intel® FCoE Boot,
and CLP to be written. The update operation writes a new image to the adapter's Flash and modifies the EEPROM, which
may temporarily disable the operation of the Windows* network device driver. You might need to reboot the computer
following this operation.
You cannot update the flash image of a LOM; this button will be disabled.
Storage Adapter Miniport Device's Property Window Tabs
There are two ways to navigate to the FCoE properties:
Through the Intel Ethernet Virtual Storage Miniport Driver for FCoE Storage Controllers properties from the Windows
Device Manager.