Dell Intel PRO Family of Adapters - Manual (Page 21)

VLAN Tab
VLAN IDs are obtained through FIP VLAN discovery. This is a read-only page.
Virtual Ports Tab
A list of the Virtual Ports associated with the HBA has a column for the WWPN and FCID for each Virtual Port. "Not Connected"
is displayed in the FCID column if it is not logged in to a target.
Network Adapter Device's Property Window Tabs
Boot Options Tab
From the Boot Options tab, you can obtain Target information and update the Flash.
Properties Button Click on Properties button with Boot Targets selected to launch Target Properties Dialog.
NOTE: This button displays if you have either iSCSI or FCoE boot enabled and a target selected
in the Settings list.
Target Properties
Dialog Target:
Each Target field contains WWPN numbers for the FCoE boot targets discovered on the
network and None Selected.
LUN:
Each LUN field displays the LUNs on the selected target. If no target is selected, the LUN
field is empty.
Boot
Order:
Boot Order field options are 1, 2, 3, 4, and Not Set.