Installation overview – Dell Intel PRO Family of Adapters User Manual
Page 5
MultiPoint Mode
If more than two ENodes are detected in the VN2VN fabric, then all nodes should operate in Multipoint mode:
Installation Overview
For information on System Requirements see
.
1. Install FCoE-capable adapters in the system. For a list of supported adapters, see
Supported Intel® Network Adapters
2. After following the above step if you are having problems, refer to
.
FCoE Infrastructure - Installation and Configuration
The following is a typical FCoE setup flow:
1. Typical FCoE-enabled
.
2. If you want to boot from an FCoE LUN:
See
Intel® Ethernet FCoE Boot Configuration
Configure Intel® Ethernet FCoE Boot Options from
Intel® PROSet for Windows* Device Manager
3. Install operating system:
Linux Installation and Configuration
Microsoft* Windows* Server Installation and Configuration
4. Configure Intel Ethernet FCoE/DCBx:
Configure DCBx
Configure FCoE
.