Dell Intel PRO Family of Adapters - Manual (Page 20)

Through the network adapter properties Data Center tab.
Fabric View Tab
The Fabric View tab displays FC fabrics, VN2VN fabrics, physical ports, targets, and LUNs:
If FC fabric is selected, the FCoE GUI displays the information in the “Fabric Information” group box (World Wide Node
Name, World Wide Port Name, FCID)
If VN2VN fabric is selected, the FCoE GUI displays the information in the “Fabric Information” group box (FC Map).
If a physical port is selected, the FCoE GUI displays the information in the “Physical Port” group box (World Wide Node
Name, World Wide Port Name, FCID).
If a target is selected, the FCoE GUI displays the information in the “Target Information” group box (World Wide Node
Name, World Wide Port Name).
If a LUN is selected, the FCoE GUI displays the information in the “LUN Information” group box (LUN ID, OS Device
Name, Capacity, Block Size).
For general information about VN2VN, see FCoE VN to VN Support .
Advanced Tab
The Advanced Tab displays information about all the settings configurable from the host. These include Timeout Value,
DeviceQDepth and Linkdown Timeout.
Statistics Tab
The Statistics Tab displays information about FCoE statistics and errors since the initialization of the FCoE stack.