Dell Intel PRO Family of Adapters - Manual (Page 25)

Intel® Gigabit 2P I350-t Adapter
Intel® Gigabit 4P I350-t Adapter
Intel® Gigabit 4P I350-t rNDC
Intel® Gigabit 4P I350 bNDC
Intel® Gigabit 2P I350 LOM
3. Configure the Option ROM to boot from an FCoE LUN:
a. Input Ctrl+D during boot message.
b. Select the boot port.
c. Select Discover Targets.
d. Choose a target, enter its LUN and set its boot order to 1.
NOTE: Once Intel® Ethernet FCoE drivers are installed, in order to uninstall them the Option ROM
must not be allowed to connect to an FCoE LUN. Either disable the boot port in the Option ROM or
set all boot orders to 0.
4. During POST ensure that the FCoE Option ROM loads and finds the LUN.
5. Ensure local disk is set as first boot option in system BIOS boot menu.
Install the OS and drivers
6. Install Windows Server on the first local drive.
7. Boot to the OS on the local disk. Install Intel® Ethernet drivers via CD, selecting FCoE Using Data Center Bridging.
Windows 2008 may ask to install an update and request a reboot. Click OK and reboot at the prompt. After rebooting,
re-run Intel® Ethernet driver FCoE/DCB installation.
8. Using Disk Management, verify that FCoE LUNs are mounted.
9. Reboot.
Prepare Windows for imaging