Cannot run the fax software – Dell V715w All In One Wireless Inkjet Printer User Manual
Page 124
M
AKE
SURE
THAT
THE
PRINTER
MEMORY
IS
NOT
FULL
The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or
runs out of paper while receiving the fax, then the printer saves the fax so you can print it later. However, if the
printer memory is full, then the printer may not be able to receive more incoming faxes. An error message appears
on the display when the printer memory is full. Resolve the error to free up space in the printer memory.
M
AKE
SURE
THAT
F
AX
F
ORWARDING
IS
DISABLED
You may have turned on Fax Forwarding. Disable this option so that the printer can receive the fax.
1
From the printer control panel, press
.
2
Press the arrow buttons to scroll to Fax Setup, and then press
.
3
Press the arrow buttons to scroll to Ringing and Answering, and then press
.
4
Press the arrow buttons to scroll to Fax Forward, and then press
.
5
Press the arrow buttons to scroll to Off, and then press
.
I
NCREASE
THE
RINGER
VOLUME
If you set the printer to receive faxes manually (Auto Answer Off), then increase the ringer volume.
M
AKE
SURE
THAT
YOU
HAVE
THE
CORRECT
MANUAL
ANSWER
CODE
If you set the printer to receive faxes manually (Auto Answer Off), then you need to press the correct code when
a fax comes in so that the printer can receive it.
To retrieve the correct code:
1
From the printer control panel, press
.
2
Press the arrow buttons to scroll to Fax Setup, and then press
.
3
Press the arrow buttons to scroll to Ringing and Answering, and then press
.
4
Press the arrow buttons to scroll to Manual Pickup Code, and then press
.
5
Copy the manual answer code that appears on the display.
Cannot run the fax software
The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings
in the fax software.
M
AKE
SURE
THE
PRINTER
IS
CONNECTED
TO
A
TELEPHONE
LINE
You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a VoIP adapter,
or a cable modem) before you can open the fax software and configure the fax settings.
M
AKE
SURE
THAT
THE
PRINTER
IS
CONNECTED
TO
THE
COMPUTER
M
AKE
SURE
THAT
THE
PRINTER
IS
NOT
IN
P
OWER
S
AVER
MODE
Troubleshooting
124