Dell XPS M140 (MXC051, Late 2005) - Manual (Page 115)

Adding and Replacing Parts 115
6 Replace the memory module cover and tighten the screws.
NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close
may damage your computer.
7 Insert the battery into the battery bay, or connect the AC adapter to your computer and an
electrical outlet.
8 Reinstall the hard drive. See "Hard Drive" on page 108.
9 Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information.
To confirm the amount of memory installed in the computer, click the
Start button, click Help and
Support, and then click Computer Information.
Installing a Memory Module in Connector DIMM A
The memory module connector labeled "DIMM A" is located under the keyboard.
1 Follow the procedures in "Before You Begin" on page 105.
2 Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE: If you leave the area, ground yourself again when you return to the computer.
1 tab in connector slot
1
book.book Page 115 Wednesday, October 26, 2005 1:00 PM