Replacing the hinge cover, Keyboard – Dell XPS M140 (MXC051, Late 2005) User Manual

Page 125

Advertising
background image

Adding and Replacing Parts

125

6 Ease the hinge cover up, moving from right to left, and remove it.

Replacing the Hinge Cover

1 Insert the left edge of the cover into place.
2 Press from left to right until the cover snaps into place.
3 Close the display and turn the computer upside down.
4 Replace the two screws in the battery bay.
5 Replace the battery (see page 108).

Keyboard

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by

periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE:

To avoid damaging the system board, you must remove the main battery before you begin

working inside the computer.

1

hinge cover

2

indent

1

2

book.book Page 125 Wednesday, October 26, 2005 1:00 PM

Advertising