Dell XPS M140 (MXC051, Late 2005) - Manual (Page 73)

Setting Up a Home and Office Network 73
10
Setting Up a Home and Office Network
Connecting to a Network Adapter
Before you connect your computer to a network, the computer must have a network adapter
installed and a network cable connected to it.
To connect a network cable:
1 Connect the network cable to the network adapter connector on the back of your computer.
NOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
2 Connect the other end of the network cable to a network connection device, such as a
network wall connector.
NOTE: Do not use a network cable with a telephone wall connector.
Network Setup Wizard
The Microsoft ® Windows ® XP operating system provides a Network Setup Wizard to guide you
through the process of sharing files, printers, or an Internet connection between computers in a
home or small office.
1 Click the Start button, point to All Programs→ Accessories→ Communications, and then
click Network Setup Wizard.
2 On the Network Setup Wizard welcome screen, click Next.
3 Click Checklist for creating a network.
book.book Page 73 Wednesday, October 26, 2005 1:00 PM