Dell XPS M140 (MXC051, Late 2005) - Manual (Page 116)

116 Adding and Replacing Parts
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m 3 Remove the hinge cover. See "Hinge Cover" on page 123.
NOTE: Ensure that you remove the two screws in the battery bay as part of the hinge removal
procedure.
4 Remove the keyboard. See "Keyboard" on page 125.
5 Loosen the captive screws on the memory module cover, and then remove the memory
module cover.
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-
module securing clips.
6 If you are replacing a memory module, remove the existing module:
a Use your fingertips to carefully spread apart the securing clips on each end of the memory
module connector until the module pops up.
b Remove the module from the connector.
1 tab in connector slot
1
book.book Page 116 Wednesday, October 26, 2005 1:00 PM