Dell PowerVault DL2200 - Manual (Page 11)

Configuring the Dell™ PowerVault™ MD3000i Array as a Backup Target for Symantec™ Backup Exec™
Page 9
Figure 5: Logging on to the MD3000i Targets
5. If the virtual disk requires CHAP credentials, click Advanced in the Log On to Target dialog
box. Set the CHAP logon information check box and specify the CHAP user name and secret.
(Refer to figure 6) (For more information on how to setup/configure MPIO, please refer to the
“
MPIO to PowerVault™ MD3000i Array with MICROSOFT iSCSI INITIATOR” under technical
resources section)