Removing the diskette drive – Dell Precision 330 User Manual
Page 22
Removing the Diskette Drive (Mini Tower Chassis)
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then
remove the computer cover
.
2.
Rotate the power supply
away from the system board.
3.
Remove the front panel
.
4. Disconnect the DC power and interface cables from the back of the drive.
5. Press the green diskette-drive bracket release button and slide the drive assembly out of the chassis (see the following figure).
Removing the Diskette-Drive Bracket (Mini Tower Chassis)
CAUTION:
Before you perform this procedure, see "
Precautionary Measures
."
NOTICE:
Before disconnecting a peripheral from the system or removing a component from the system board, verify that the standby power indicator on the
system board has turned off. To locate this indicator, see "
System Board Components
" or "
Interior Service Label
."