Expansion-card guide – Dell Precision 330 User Manual
Page 32
Back to Contents Page
Expansion-Card Guide
Dell Precision™ WorkStation 330 Systems Service Manual
Desktop Chassis
l
Removing the expansion-card guide
l
Replacing the expansion-card guide
Removing the Expansion-Card Guide (Desktop Chassis)
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then
remove the computer cover
.
2.
Remove the hard-drive bracket
.
3. Remove all expansion cards.
4. Remove the expansion-card guide:
a. Face the computer from the front.
b. From the outside of the chassis, press in the two tabs on the left side of the card guide.
This will release the left card-guide tabs from the chassis.
c. Rotate the released side of the card guide away from the front chassis wall.
d. With the released side of the card guide away from the chassis wall, pull the card guide back away from the chassis (see the following figure).
Removing the Expansion-Card Guide (Desktop Chassis)
CAUTION:
Before you perform this procedure, see "
Precautionary Measures
."
NOTICE:
Before disconnecting a peripheral from the system or removing a component from the system board, verify that the standby power indicator on the
system board has turned off. To locate this indicator, see "
System Board Components
" or "
Interior Service Label
."