Dell Precision 330 - Manual (Page 35)

Back to Contents Page
Front Panel (Mini Tower Chassis Only)
Dell Precision™ WorkStation 330 Systems Service Manual
Removing the Front Panel
Replacing the Front Panel
Removing the Front Panel
1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover .
2. Release the front panel by pressing the green front-panel release button marked with the icon (see the following figure).
Removing the Front Panel (Mini Tower Chassis)
3. While pressing the front-panel release button, rotate the top of the panel outward, away from the chassis.
4. Lift the panel away from the chassis.
Replacing the Front Panel
Fit the two front-panel retaining hooks into the recessed slots at the bottom of the chassis. See " Removing the Front Panel (Mini Tower Chassis) ." Then rotate the top
of the panel toward the chassis until the front-panel latches snap into the tabs on the front panel.
Back to Contents Page
CAUTION: Before you perform this procedure, see " Precautionary Measures ."