Dell PowerEdge C6100 - Manual (Page 20)

20
About Your System
Power and System Board Indicator Codes
The LEDs on the system front panel and back panel display status codes
during system startup. For location of the LEDs on the front panel,
see Figure 1-1 for 3.5" hard drive and Figure 1-4 for 2.5" hard drive systems.
For location of the LEDs on the back panel, see Figure 1-8.
Table 1-2 lists the status associated with the status codes.
Table 1-2. Status Indicator Codes
Component Indicator Condition
Power-on
indicator Steady Green
Blinks Amber
Blinks
Green/Amber
Power On S0/S1
BMC Critical condition event in Power Off
mode S4/S5
BMC Critical condition event in Power On
mode S0/S1
System
identification
indicator Steady Blue
Blinks Blue
Off
IPMI Via Chassis Identify Command On or
ID Button Press ID On
Only IPMI using Chassis Identify Command
Blink On
IPMI using Chassis Identify Command Off
or ID Button Press ID Off
book.book Page 20 Thursday, March 4, 2010 4:38 PM