Dell PowerEdge C6100 - Manual (Page 46)

46
Using the System Setup Program
Change Supervisor Password Installs, changes or clears the password.
If you select these items and press Enter, a dialog box
appears and then you can enter a password. You can
enter no more than six letters or numbers.
Press Enter after you have typed in the password.
A second dialog box asks you to retype the password
for confirmation. Press Enter after you have retyped
it correctly. The password is required at boot time,
or when the user enters the Setup Utility.
User Access Level
(Full Access default)
Sets the user access level:
• No Access: prevents user access to the Setup Utility.
• View Only: allows user access to the Setup Utility
but the fields cannot be changed.
• Limited: allows only limited fields to be changed
such as date and time.
• Full Access: allows user access to the Setup Utility
and the fields can be changed.
Change User Password Installs, changes or clears the password.
Password Check
(Setup default)
Selects the password check mode:
Setup: checks password while invoking setup.
Always: checks password while invoking setup as well
as on each boot.
Boot Sector Virus Protection
(Disabled default) Enables and disables boot sector virus protection
Option Description
book.book Page 46 Thursday, March 4, 2010 4:38 PM