Dell PowerEdge C6100 - Manual (Page 47)

Using the System Setup Program
47
Server Menu
NOTE:
Delay time, Minimum time, and Maximum time are only shown in SETUP
screen when AC Power Recovery Delay is set to User define. The selection of
Restore on AC Power Loss setup to Power-on or Last State takes 60 seconds for
running BMC initialization after AC Power on.
Option Description
Power Management (Node
Management default) Sets power mode. The options are:
• Maximum Performance
• Operating system Control/EIST
• Active Power Controller
• Node Management
If Maximum Performance or Active Power Controller is
selected, Intel SpeedStep is disabled. If OS
Control/EIST or Node Management is selected,
Intel SpeedStep is enabled. ME function is disabled
if OS Control/EIST is selected.
IOAT2 (Disabled default) Enables or disables IOAT2.
Wake on RING function
(Disabled default) Enables or disables Wake on RING function.
WHEA Support
(Disabled default) Enables or disables Windows Hardware Error
Architecture.
Restore on AC Power Loss
(Power On default) Restores the AC power setting. The options are
Power Off, Power On and Last State.
AC Power Recovery Delay
(Immediate default) Selects the time of system power on after BMC initiates:.
• Immediate: powers on directly after BMC initiates.
• Random: randomly selects time to power on.
• User define: user selects the time.
– Delay Time: Sets AC power recovery delay time
between minimum and maximum.
book.book Page 47 Thursday, March 4, 2010 4:38 PM