Dell PowerEdge 2800 - Manual (Page 13)

Tower-to-Rack and Rack-to-Tower Conversion Guide
11
Figure 1-3. Removing the Metal Feet
3 Remove the system cover and set it aside (see Figure 1-4):
a Loosen the two thumbscrews on the front of the system.
b Slide the system cover back and grasp the cover at both ends.
c Carefully lift the cover away from the system and set it aside.
metal feet (4) hex-head Phillips
screws (4)
Y1001bk0.book Page 11 Thursday, July 8, 2004 4:32 PM