Dell PowerEdge 2800 User Manual
Page 14
12
Tower-to-Rack and Rack-to-Tower Conversion Guide
www
.dell.com | support.dell.com
Figure 1-4.
Removing and Installing the Cover
Removing the Control Panel Assembly and Tower Front Panel
1
Slide the drive tray to the maintenance position.
a
Using a #2 Phillips screwdriver, loosen the captive screw that secures the drive tray
release handle to the chassis. See Figure 1-5.
b
Rotate the drive tray release lever toward the front of the system.
c
While grasping both sides of the front panel, slide the drive tray forward until the tray is
in the maintenance position.
d
Label each hard drive, any optical drives, and devices installed in the media bay with their
location in the chassis.
e
Disconnect any cables from the media bay devices.
f
Remove the hard drives, any optical drives, and devices installed in the media bay from
the system.
cover
thumbscrews (2)
Y1001bk0.book Page 12 Thursday, July 8, 2004 4:32 PM