Software overview, Status monitor center, Set ip address utility – Dell 2330d/dn Mono Laser Printer User Manual
Page 127
Software Overview
Removing and Reinstalling Software
Dell Printer Software Uninstall Utility
Installing the Optional XPS Driver
Dell Printer Configuration Web Tool
Use the Drivers and Utilities CD that came with your printer to install a combination of software applications, depending on
your operating system.
Status Monitor Center
NOTE:
For the local Status Monitor Center to work properly, bidirectional communication support must be in place so
the printer and computer can communicate. An exception is added to the Windows
®
Firewall to allow this
communication.
Use the Status Monitor Center to manage multiple Status Monitors.
Double-click a printer name to open its Status Monitor, or select Run to open a Status Monitor for a particular printer.
Select Update to change the appearance of the list of printers.
Select Help to read the online Help.
Set IP Address Utility
NOTE:
This application is not available when the printer is locally attached to a computer. For the Set IP Address Utility
to work properly, add an exception to the Windows
®
Firewall.
The Set IP Address Utility lets you set up an IP address and other important IP parameters. To set the IP address manually:
1. Connect the network cable, and turn the printer on.
Wait for a moment to make sure the IP address is assigned. Print a network setup page. For more information, see
.
2. If the printer MAC address is already known, then get the printer IP address by using the Set IP Address Utility to
match the network MAC address with the printer network adapter.
3. Click on the TCP/IP Settings.
4. To set the printer IP address manually, click the Manual Add option.
NOTE:
If you purchased your printer and computer separately, you must use the Drivers and Utilities CD to install these
software applications.
NOTE:
These software applications are not available with Linux or Macintosh.