Dell 2330d/dn Mono Laser Printer - Manual (Page 39)

The finishing menu specifies the default finishing for all print jobs.
1. From the menu list, use the Arrow buttons to scroll to the Finishing menu.
2. Press the Select button .
3. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button
.
4. Use the Arrow buttons to scroll through the available menu items.
5. When the setting you want appears on the display, press the Select button to save the setting.
Main Menu Mode Main Menu
Finishing Sides (Duplex)
Duplex Bind
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
N-up (Pages/Side)
N-up Ordering
Orientation
N-up Border
Finishing Mode Main Menu
From this
menu:
You can:
Sides
(Duplex)
Enable duplex (2-sided) printing.
On
Off*
Duplex Bind Define the way duplexed pages are bound and how the printing on
the back of the page is oriented in relation to the printing on the
front of the page.
Long Edge*
Short Edge
Copies Specify a default number of copies for each print job.
1*–999
Blank Pages Define whether blank pages are inserted in a print job.
Do Not Print*
Print
Collation Stack the pages of a print job in sequence when printing multiple
copies.