Dell 2330d/dn Mono Laser Printer - Manual (Page 40)

* Factory default setting
On—Prints the entire job the number of times specified by the
Copies menu item. For example, if you set Copies to 2 and send
three pages to print, the printer prints page 1, page 2, page 3,
page 1, page 2, page 3.
Off*—Prints each page of a job the number of times specified by
the Copies menu item. For example, if you set Copies to 2 and
send three pages to print, the printer prints page 1, page 1,
page 2, page 2, page 3, page 3.
Separator
Sheets
Specify whether blank separator sheets are inserted.
None*
Between Copies
Between Jobs
Between Pages
Separator
Source
Specify the paper source for separator sheets.
Tray <x>*
MP Feeder
NOTE: From the Paper menu, Configure MP must be set to Cassette
in order for MP Feeder to appear as a menu setting.
N-up
(Pages/Side)
Specify that multiple-page images be printed on one side of a sheet
of paper.
Off*
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
N-up
Ordering
Specify the positioning of multiple-page images when using multi-
page print.
Horizontal*
Vertical
Reverse Horizontal
Reverse Vertical
NOTE: Positioning depends on the number of images and whether
the images are in portrait or landscape orientation.
Orientation Specify the orientation of a multiple-page sheet.
Auto*
Long Edge
Short Edge
N-up Border Print a border around each page image when using multi-page print.
None*
Solid
Quality Mode
Mode Menu Mode Main Menu
Quality Print Resolution