Dell PowerEdge C2100 - Manual (Page 130)

126 Jumpers and Connectors
NOTE: The "*" in the table of system configuration jumpers describes the default
status and the default state is not active state.
Backplane Jumper Settings
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
Figure 5-2. 3.5" Hard-Drive Expander Backplane
The function of the jumper installed on the expander backplane is shown
below.
JP2 iBMC Disable *Disable Enable
Table 5-2. Jumper Installed on Backplane
Jumper Function Off On
J15 RAID Card setting LSI Series PERC Series
Table 5-1. System Configuration Jumpers
Jumper Function Off On
book.book Page 126 Friday, November 8, 2013 11:29 AM