Dell PowerEdge C2100 - Manual (Page 65)

Installing System Components 61
Figure 3-7. Removing and Installing the Cooling Shroud
Installing the Cooling Shroud
1 Align the cooling shroud around the sides of the heat sink and along the
memory slots and lower it into the system. See Figure 3-7.
2 Secure the cooling shroud using the four screws. See Figure 3-7.
3 If applicable, connect the internal hard drive cables.
4 Close the system. See "Closing the System" on page 59.
5 Reconnect the system and peripherals to their electrical outlets and turn
on the system.
1 screws (4) 2 internal hard drives (2)
3 cooling shroud
3
1
2
book.book Page 61 Friday, November 8, 2013 11:29 AM