Dell PowerEdge C2100 - Manual (Page 52)

48 Using the System Setup Program
iBMC LAN Configuration
QPI Error Logging
(Enabled default)
Enables or disables IOH QPI 0/1 error.
IOH Internal Error
Logging (Enabled
default)
Enables or disables IOH Internal error logging.
NMI on Error
(Fatal default)
Enable to set the state of NMI on Error:
• Fatal: Fatal error issue NMI.
• Uncorrectable: Fatal and Uncorrectable errors issue
NMI.
• Correctable: Issues NMI on all errors.
Option Description
Channel Number Displays channel number of iBMC.
Channel Number Status
(01 default)
Displays channel number status of iBMC.
iBMC LAN Port
Configuration
(Shared-NIC default)
Select the iBMC LAN Port Configuration type.
DHCP Enabled
(Disabled default)
Enables or disables the iBMC to get the LAN IP from
a DHCP server.
IP Address Enter an IP address in decimal in the form of
XXX.XXX.XXX.XXX (XXX less than 256 and
in decimal only).
Subnet Mask Enter a Subnet Mask in decimal in the form of
XXX.XXX.XXX.XXX (XXX less than 256 and
in decimal only).
Gateway Address Enter Gateway Address in decimal in the form of
XXX.XXX.XXX.XXX (XXX less than 256 and
in decimal only).
Current MAC Address in
iBMC
Displays the MAC address of iBMC.
IPV6 Mode Enable or disable IPv6 support in iBMC.
Option Description
book.book Page 48 Friday, November 8, 2013 11:29 AM