Dell PowerEdge C2100 - Manual (Page 51)

Using the System Setup Program 47
Server Menu
NOTE: Delay Time, Minimum time, and Maximum time are only shown in SETUP
screen when AC Power Recovery Delay is set to User define. The selection of
Restore on AC Power Loss setup to Power-on or Last State takes 60 seconds for
running iBMC initialization after AC Power on.
Option Description
Status of iBMC Displays the status of iBMC.
IPMI Specification
Version
Displays the iBMC supported IPMI version.
iBMC Firmware Version Displays the firmware version of iBMC.
Set iBMC LAN
Configuration
Input for Set LAN configuration command.
Remote Access
Configuration
Configures remote access.
Restore on AC Power
Loss (Power Off default)
Restores the AC power setting. The options are Power
Off, Power On and Last State.
Power Staggering
AC Recovery (Immediate
default)
Selects the time of system power on after iBMC initiates.
Immediate: powers on directly after iBMC initiates.
Random: randomly selects time to power on.
User define: allows the user to select the time.
Power On Delay Sets the AC power recovery delay time.
View iBMC System
Event Log
Displays all events in the iBMC Event Log.
Clear iBMC System
Event Log
Clears all events in iBMC System Event Log.
Event Logging
(Enabled default)
Enables or disables BIOS to record Event Logging.
ECC Event Logging
(Enabled default)
Enables or disables ECC Event Logging.
PCI Error Logging
(Enabled default)
Enables or disables PCI Error Logging.
book.book Page 47 Friday, November 8, 2013 11:29 AM