Dell Inspiron 13z (5323, Mid 2012) - Manual (Page 17)

Removing the Base Cover | 17
5 Removing the Base Cover
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Close the display, if it is open, and turn the computer over.
2 Loosen the captive screw that secures the base cover to the computer base.
3 Using your fingertips, pry the base cover from the computer base.
4 Lift the base cover off the computer base.
1 tabs 2 base cover
3 captive screw
3
2
1
book.book Page 17 Monday, October 8, 2012 3:56 PM