Dell Inspiron 13z (5323, Mid 2012) - Manual (Page 19)

Replacing the Base Cover | 19
6 Replacing the Base Cover
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the base cover into the slots on the computer base and snap the
base cover into place.
2 Tighten the captive screw that secures the base cover to the computer base.
Postrequisites
Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 19 Monday, October 8, 2012 3:56 PM