Procedure – Dell Inspiron 13z (5323, Mid 2012) User Manual
Page 40
Advertising
40
| Removing
the
Wireless
Mini-Card(s)
Procedure
1
Close the display, if it is open, and turn the computer over.
2
Disconnect the antenna cables from the connectors on the Mini-Card(s).
3
Remove the screw that secures the Mini-Card(s) to the connector on the
system board.
4
Lift the Mini-Card(s) out of the system-board connector.
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
1
antenna cables (2)
2
Mini-Card
3
screw
4
system-board connector
1
2
3
4
book.book Page 40 Monday, October 8, 2012 3:56 PM
Advertising