Procedure – Dell Inspiron 13z (5323, Mid 2012) User Manual
Page 86
Advertising
86
| Removing
the
Display
Assembly
Procedure
1
Disconnect the antenna cables from the connectors on the wireless Mini-Card(s).
See "Removing the Wireless Mini-Card(s)" on page 39.
2
Make a note of the antenna cables routing and remove the cables from the
routing guides.
3
Turn the computer over and open the display as far as possible.
4
Pull the antenna cables up through the slot on the computer base.
5
Pull the pull-tab to disconnect the display cable from the system-board connector.
6
Remove the screws that secure the display assembly to the computer base.
7
Lift the display assembly off the computer base.
1 display assembly
2 screws (4)
3 display cable
4 pull-tab
1
2
3
4
book.book Page 86 Monday, October 8, 2012 3:56 PM
Advertising