Dell Intel PRO Family of Adapters - Manual (Page 124)

Event
ID Message Severity
24 E1express:
PROBLEM: Could not start the PRO/1000 adapter.
ACTION: Install updated driver. Error
25 E1express:
PROBLEM: MDIX setting conflict with the AutoNeg Settings. MDIX will not work.
ACTION: Enable AutoNeg and restart. Warning
26 E1express:
Link has been established. Informational
27 E1express:
Link has been disconnected. Warning
28 E1express:
Link has been established. Informational
29 E1express:
PROBLEM: Could not start the gigabit network connection.
ACTION: Connect cable to the network device and restart, or disable Link Based Login and
restart. Error
30 E1express:
The PRO/1000 adapter is set up for auto-negotiation but the link partner is not configured for
auto-negotiation. A duplex mismatch may occur. Warning
31 E1express:
Spanning Tree Protocol has been detected on the device your network connection is
attached to. Informational
32 E1express:
Link has been established: 1000Mbps. Informational
33 E1express:
Link has been established: 100Mbps full duplex. Informational
34 E1express:
Link has been established: 100Mbps half duplex. Informational
35 E1express:
Link has been established: 10Mbps full duplex. Informational
36 E1express:
Link has been established: 10Mbps half duplex. Informational
37 E1express:
PROBLEM: Could not allocate all resources necessary for the high priority transmit queue.
ACTION: Reduce the number of transmit descriptors and restart.
ACTION: Disable multiple transmit queues feature and restart. Warning
38 E1express:
The driver failed to initialize properly.
You may not be able to change the adapter settings.
To resolve, reload the driver. Warning
39 E1express:
Adapter unload process may have not completed successfully.
Driver may not be unloaded.
To resolve, reboot the system. Warning
40 E1express:
Smart Speed has downgraded the link speed from the maximum advertised. Informational