Dell Intel PRO Family of Adapters - Manual (Page 140)

For continued safe operation in case of an abnormal circumstance, always have the provided laser connector cover in
place or a compatible fiber optics cable properly connected when power is available to the product.
The Laser device must be factory serviced ONLY by the responsible manufacturer! NO adjustments, service or main-
tenance is to be performed otherwise.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
These Class 1 Laser devices:
Comply with FDA/CDRH per CFR21, subchapter J.
Comply with EN60825-1:1994+A1+A2
End-of-Life/Product Recycling
Product recycling and end-of-life take-back systems and requirements vary by country. Contact the retailer or distributor
of this product for information about product recycling and/or take-back.