Dell Studio 1569 (Late 2009) - Manual (Page 19)

6. Pull the pull-tab to disconnect the display cable from the display panel.
Replacing the Display Panel
1. Follow the procedures in Before You Begin .
2. Connect the display cable to the connector on the back of the display panel.
3. Use the alignment posts to place the display panel on the display cover.
4. Replace the four screws that secure the display panel to the display cover.
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
7. Replace the battery (see Replacing the Battery ).
Display Hinges and Brackets
1 screws (4) 2 display panel
3 display cover
1 display panel 2 pull-tab
3 display cable
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.