Wireless mini-card(s), Removing the mini-card(s) – Dell Studio 1569 (Late 2009) User Manual

Page 30

Advertising
background image

Back to Contents Page

 

Wireless Mini-Card(s)

Dell™ Studio™ 1569 Service Manual 

  

Removing the Mini-Card(s)

  

Replacing the Mini-Card(s)


Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

 

 

 

 

If you ordered a wireless Mini-Card with your computer, the card is already installed.

Your computer supports two Mini-Card slots:

l

 

One full Mini-Card slot – Wireless Wide Area Network (WWAN)

l

 

One half Mini-Card slot – Wireless Local Area Network (WLAN)

 

Removing the Mini-Card(s)

 

1.

Follow the procedures in

Before You Begin

.


 

2.

Remove the battery (see

Removing the Battery

).


 

3.

Loosen the two captive screws that secure the Mini-Card cover to the computer base.

 

4.

Lift the Mini-Card cover at an angle and ease the tabs out of the computer base.

 

5.

Disconnect the antenna cables from the Mini-Card.

 

6.

Remove the screw that secures the Mini-Card to the system board.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

CAUTION:

When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"

in the safety instructions that shipped with your computer).

NOTE:

Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.

NOTE:

Depending on the configuration of the computer when it was sold, the

Mini-Card slot may or may not have a Mini-Card installed in the slot.

1

Mini-Card cover

2

captive screws (2)

3

tabs (2)

4

computer base

Advertising