Dell Studio 1569 (Late 2009) - Manual (Page 20)

Removing the Display Hinges and Brackets
1. Follow the procedures in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the display panel (see Removing the Display Panel ).
5. Remove the four screws that secure the display hinges and brackets to the display cover.
Replacing the Display Hinges and Brackets
1. Follow the procedures in Before You Begin .
2. Replace the four screws that secure the display hinges and brackets to the display cover.
3. Replace the display panel (see Replacing the Display Panel ).
4. Replace the display bezel (see Replacing the Display Bezel ).
5. Replace the display assembly (see Replacing the Display Assembly ).
6. Replace the battery (see Replacing the Battery ).
Back to Contents Page
1 display cover 2 screws (4)
3 display hinges and brackets (2)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.