Dell Studio 1569 (Late 2009) - Manual (Page 47)

Replacing the USB/Audio Board
1. Follow the procedures in Before You Begin .
2. Place the USB/audio board on the computer base.
3. Replace the three screws that secure the USB/audio board to the computer base.
4. Slide the audio cable into the USB/audio board connector and press down on the connector latch to secure the cable.
5. Connect the speaker cable to the USB/audio board connector.
6. Connect the USB cable to the USB/audio board connector.
7. Replace the palm rest (see Replacing the Palm Rest ).
8. Replace the keyboard (see Replacing the Keyboard ).
9. Replace the power button panel (see Replacing the Power Button Panel ).
10. Replace the battery (see Replacing the Battery ).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.