Optical drive, Removing the optical drive – Dell Studio 1569 (Late 2009) User Manual
Page 33
Back to Contents Page
Optical Drive
Dell™ Studio™ 1569 Service Manual
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Optical Drive
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the screw that secures the optical drive assembly to the computer base.
4.
Remove the power button panel (see
Removing the Power Button Panel
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the palm rest (see
Removing the Palm Rest
).
7.
Remove the five screws that secure the optical drive to the computer base.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as the back panel) on the computer.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.