Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 40)

38 Appendix E. Netware environment
• IPX/SPX mode configuration: Configure IPX/SPX mode for your
NetWare system.
–
Bindery configuration: You can set up the bindery server.
•
Bindery Setup: Use this option if you have already configured one
or more bindery servers (file servers running NetWare 3.x, or 4.x,
5.x, or 6.x in bindery emulation) with a print server and a print
queue for network printing. Before entering bindery settings, The
network print server connected to the network and the NetWare
file server must be running. If access to the file server or print
server is restricted, you need to log in to a NetWare Client system.
• Bindery Print Server: Enter the name of the print server that you
have configured in the NetWare utility PCONSOLE. This is the
print server that will route print jobs to the network print server
from NetWare Client on IPX networks.
• File Server: Enter the name of the NetWare server on which you
have configured a print server and a print queue to handle
network printing.
– NDS configuration: You can set up the NDS server.
•
Enable/Disable NDS: If NetWare servers you will use to print to
the network print server are running NetWare 4.x/5.x/6.x in native
mode.
• NDS Tree: Enter the name of the NDS tree that contains the
printer, print server, and print queue objects you have previously
defined on the NetWare server for the network print server. Your
new NDS tree selection automatically overwrites any previous tree
selection. If you change the NDS tree selection and there are also
current Bindery settings, you are alerted that they will be deleted.
If you continue with NDS Setup, you can replace Bindery settings
afterwards.
• NDS Print Server: Enter the name of the print server object as
“name.context.”
NOTE: Use NDS Setup if your network uses NetWare 4.x/5.x/6.x in native mode.
Use Bindery Setup if your network uses NetWare 3.X or uses NetWare 4.x/5.x/6.x in
bindery emulation mode.