Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 52)

50 Appendix G. Wireless network environment
Network Status
This section displays information on the current wireless connection. This
window appears when you select Wireless in EWS. The option items may
differ due to the printer models.
• Link Status: indicates whether or not the WLAN interface is connected to
other wireless devices.
• SSID
• Operation Mode
• Associated Frequency: indicates the associated frequency mode, for
example, 802.11b/g.
• BSSID: displays the associated BSSID, for example, 00:02:78:E3:43:89.
• Link Quality: represents quality of the wireless link between the print
server and an access point or other devices by percentage, for example,
Excellent, Very Good.
• Current Channel: represents the associated channel, for example, [10]
2457 MHz.
Network setup
These are the basic parameters required to make wireless connections found
on the Wireless menu of EWS. Click Submit after changing parameters.
• SSID: SSID (Service Set Identifier) is a name that identifies a wireless
network. Access points and wireless devices attempting to connect to a
specific wireless network must use the same SSID. The SSID is case-
sensitive.
• Operation Mode: Operation Mode refers to the type of wireless
connections. Choose one of the following options:
–
Ad hoc: allows wireless devices to communicate directly with each
other in a peer-to-peer environment.
NOTE: In Ad-Hoc mode, you may need to restart the print server depending
on your wireless network device.
– Infrastructure: allows wireless devices to communicate with each
other through an access point.