Dell 2355dn Multifunction Mono Laser Printer User Manual
Page 55
Appendix G. Wireless network environment
53
• User Password: 802.1x EAP authentication methods, such as EAP-MD5,
EAP-MSCAHPv2, EAP-TTLS, and PEAP, require an EAP user password as
an account password. A user password is necessary, if 802.1x authentication
is enabled. This is not saved as the default value.
•
Root certificate: You can install a root certificate. To be installed on the
Wireless Network Printer Card, a root certificate must be in the form of
Base64 Encoded X.509 with a .cer extension and be less than 3,072 bytes.
EAP-TLS, EAP-TTLS, and PEAP authentications need root certificates.
a
Click Configure.
b
If the root certificate has been configured, detailed information on the
root certificate displays.
c
Select the root certificate file.
d
Upload the file and click back to return to the front page.
–
Enable Server certificate Validation: This option determines whether
or not the client authenticates the server. If Server Certificate
Validation is disabled, EAP-TTLS and PEAP authentication do not
require a root certificate.
•
Client certificate: You can install a client certificate. To be installed on the
Wireless Network Printer Card, a client certificate must be in the form of
PKCS #12 / Personal Information Exchange with a .pfx extension and be
less than 3,072 bytes. EAP-TLS authentication needs a client certificate.
a
Click Configure.
b
If the client certificate has been configured, detailed information on
the client certificate displays.
c
Select the client certificate file.
d
Upload the file and click back to return to the front page.
Making a certificate into a file using Windows Console
1
From the Windows Start menu, select Run.
2
Enter mmc in the Run dialogue box.
3
Select File Add/Remove Snap-in.
4
Click Add, select Certificate, and then click Add.